M2M Control

Case Study Highlights

Wireless Telemetry

Machine To Machine (M2M) Control

The possibilities of using TMAS GSM Telemetry solution can be further extended beyond the normal GSM remote monitoring and control. Below solution example truly depicts the beauty of M2M GSM Control where remote TMN-50T are used to activate the control output of TMN-1000 at the main control station. 

The fact that the infeasibility of using fixed telephone lines and the expensive cost of setting up a radio based infrastructure has resulted one of our clients to use two of our GSM telemetry models for M2M Control. There are hundreds of scattered buildings across in the country where their alarm panels are deployed. For each alarm panel, TMN-50T is used to monitor if there is any alarm occurrence from the respective alarm panel. Upon any such alarm occurrence detected by the TMN-50T, the user predefined control message (UDM) can be sent directly to the right TMN-1000 at the main control center so as to activate its respective output device for e.g. strobe light. Under such case, there is also an emergency pre-recorded voice massager activated at the same time.